Paper
21 May 2009 High brightness white LED driver with adaptive current control strategy
Xin Liu, Shuxu Guo, Lifang Bian, Dong Qiao, Zhengxuan Wang, Yuchun Chang
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 72822E (2009) https://doi.org/10.1117/12.830912
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
A high efficiency and high brightness white LED driver with adaptive current control strategy in 0.5um CMOS process is presented in this paper. The current control mode is determined by output current level and input voltage value, switching between normal low drop-out (LDO) regulator and 2×charge-pump mode. The presented whiter LED driver is able to drive load current as large as 1.1A. The peak efficiency as high as 95% occurs at 220mA load current, with an output voltage ripple lower than 95mV at 1.1A output current can be achieved.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xin Liu, Shuxu Guo, Lifang Bian, Dong Qiao, Zhengxuan Wang, and Yuchun Chang "High brightness white LED driver with adaptive current control strategy", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822E (21 May 2009); https://doi.org/10.1117/12.830912
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Circuit switching

Switching

Adaptive control

Capacitors

Switches

Clocks

Back to Top