Paper
28 October 2011 Design and realization of an automatic weather station at island
Yong-hua Chen, Si-ren Li
Author Affiliations +
Proceedings Volume 8205, 2011 International Conference on Photonics, 3D-Imaging, and Visualization; 82052C (2011) https://doi.org/10.1117/12.906350
Event: 2011 International Conference on Photonics, 3D-imaging, and Visualization, 2011, Guangzhou, China
Abstract
In this paper, the design and development of an automatic weather station monitoring is described. The proposed system consists of a set of sensors for measuring meteorological parameters (temperature, wind speed & direction, rain fall, visibility, etc.). To increase the reliability of the system, wind speed & direction are measured redundantly with duplicate sensors. The sensor signals are collected by the data logger CR1000 at several analog and digital inputs. The CR1000 and the sensors form a completely autonomous system which works with the other systems installed in the container. Communication with the master PC is accomplished over the method of Code Division Multiple Access (CDMA) with the Compact Caimore6550P CDMA DTU. The data are finally stored in tables on the CPU as well as on the CF-Card. The weather station was built as an efficient autonomous system which operates with the other systems to provide the required data for a fully automatic measurement system.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong-hua Chen and Si-ren Li "Design and realization of an automatic weather station at island", Proc. SPIE 8205, 2011 International Conference on Photonics, 3D-Imaging, and Visualization, 82052C (28 October 2011); https://doi.org/10.1117/12.906350
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Data communications

Visibility

Humidity

Meteorology

Carbon dioxide

Data processing

Back to Top