Paper
19 December 1985 Stress Sensor
J. R. Hodor, H. J. Decker Jr., J. Barney, J. H. Green
Author Affiliations +
Abstract
New sensors have been developed that inspect the quality of transparent materials, specifically silicon solar cells. These sensors inspect for surface, as well as, subsurface cracks and induced stresses. The main reason for development of these sensors is their ability to quantize the stresses. In the area of large solar array production, which was introduced by the Solar Array Flight Experiment (SAFE) flown on the space shuttle in 1984, these sensors are under development to automate the inspection and measurement of specific solar cell array parameters during various stages of their production. The primary parameter is the electrical interconnection's bond quality to the individual solar cells. The measured stress magnitudes at these points are used to determine the quality, specifically the strength of the bond. Preliminary results have demonstrated this correlation on a limited sampling, and utilization of these sensors in production has begun. Other application areas include the manufacture (production) of solar cells (arrays) consisting of other types of materials, potentially gallium arsenide, and the manufacture of microelectronics and other semiconductor devices.
© (1985) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. R. Hodor, H. J. Decker Jr., J. Barney, and J. H. Green "Stress Sensor", Proc. SPIE 0557, Automatic Inspection and Measurement, (19 December 1985); https://doi.org/10.1117/12.966253
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Solar cells

Inspection

Silicon

Polarization

Manufacturing

Silicon solar cells

Back to Top