Paper
28 September 2016 Temporary tattoo for wireless human pulse measurement
Author Affiliations +
Proceedings Volume 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016; 100312L (2016) https://doi.org/10.1117/12.2248211
Event: Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 2016, Wilga, Poland
Abstract
Screen-printed sensor for measuring human pulse was designed and first tests using a demonstrator device were conducted. Various materials and sensors’ set ups were compared and the results are presented as the starting point for fabrication of fully functional device. As a screen printing substrate, commercially available temporary tattoo paper was used. Using previously developed nanomaterials-based pastes design of a pressure sensor was printed on the paper and attached to the epidermis. Measurements were aimed at determining sensors impedance constant component and its variability due to pressure wave caused by the human pulse. The constant component was ranging from 2kΩ to 6kΩ and the variations of the impedance were ranging from ±200Ω to ±2.5kΩ, depending on the materials used and the sensor’s configuration. Calculated signal-to-noise ratio was 3.56:1 for the configuration yielding the highest signal level. As the device’s net impedance influences the effectiveness of the wireless communication, the results presented allow for proper design of the sensor for future health-monitoring devices.
© (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrzej Pepłowski, Daniel Janczak, Patrycja Krzemińska, and Małgorzata Jakubowska "Temporary tattoo for wireless human pulse measurement", Proc. SPIE 10031, Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2016, 100312L (28 September 2016); https://doi.org/10.1117/12.2248211
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Resistance

Electronics

Signal to noise ratio

Printing

Blood

Composites

Back to Top