Electrically driven GaAs-based photonic crystal lasers with ITO cladding layers

Shen-Che Huang; Kuo-Bin Hong; Han-Lun Chiu; Shao-Wun Lan; Tien-Chang Lu

doi:10.1117/12.2289769

21 February 2018 Electrically driven GaAs-based photonic crystal lasers with ITO cladding layers

Shen-Che Huang, Kuo-Bin Hong, Han-Lun Chiu, Shao-Wun Lan, Tien-Chang Lu

Author Affiliations +

Proceedings Volume 10542, High Contrast Metastructures VII; 105420R (2018) https://doi.org/10.1117/12.2289769
Event: SPIE OPTO, 2018, San Francisco, California, United States

Abstract

Photonic crystal (PhC) laser, with specific merits of low astigmatism, single mode operation and integration into silicon photonic system, has been studied for many years. Compared with the edge emitting lasers (EELs), surface emitting light emitters have many advantages such as small and symmetric divergence angle and platform of array-based capability. The resonance along in-plane direction preserves the high modal gain to overcome optical loss and leads to lasing action. These photonic crystal designs which has superior essential performance to that of next-generation light sources which can propose to tunable lasing multi-wavelengths with polarization control and single-mode high beam-quality. In this report, we demonstrate the fabricated realization of a novel electrically driven high-power PhC laser incorporating indium-tin-oxide (ITO) layer as a newly designed cladding layer, which could improve the laser characteristics and achieve the much lower cost of the integrated optoelectronic application. The series of investigated actual nanofabrication lasing devices with distinct designs were observed to verify the structural parameters including grating periods and area regions by tailoring the photonic crystal structure. Based upon experimental results, lasing characteristics through high current injection at room temperature inclusive of I-V curves, L-I curves, near/far field patterns, and lasing spectra were characterized and discussed. We believe this practical watt-level light output achievement should have an impact on numerous photonic devices of the coherent operations and helpful attribution to the two-dimension integrated platform in the future.

Citation Download Citation

Shen-Che Huang, Kuo-Bin Hong, Han-Lun Chiu, Shao-Wun Lan, and Tien-Chang Lu "Electrically driven GaAs-based photonic crystal lasers with ITO cladding layers", Proc. SPIE 10542, High Contrast Metastructures VII, 105420R (21 February 2018); https://doi.org/10.1117/12.2289769

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE