Presentation
17 October 2019 CNT EUV pellicle: balancing options (Conference Presentation)
Author Affiliations +
Abstract
As EUV lithography wafer volumes increase, throughput and yield require more focus. Yield can be enhanced by introducing a pellicle to hold particles out of the focal plane and minimize their impact to imaging. Using a pellicle also minimizes the extra wafer inspections required to ensure that printable mask defects do not increase over time. However, if the associated transmission loss is high, the yield advantage is offset by reduced throughput. The CNT-based pellicle offers the advantage of very high EUV transmission. CNT pellicles have also demonstrated lifetime at 300W EUV scanner power. The challenge is balancing the CNT membrane design in three areas: physical presence/the ability to stop particles, EUV transmission/imaging impact, and lifetime in the scanner/thermal tolerance. Each of these areas will be described along with simulated and experimental data illustrating the value of a CNT-based EUV pellicle solution for the future.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Emily E. Gallagher, Ivan Pollentier, Marina Y Timmermans, Marina Mariano Juste, and Cedric Huyghebaert "CNT EUV pellicle: balancing options (Conference Presentation)", Proc. SPIE 11148, Photomask Technology 2019, 111480Z (17 October 2019); https://doi.org/10.1117/12.2539262
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
KEYWORDS
Pellicles

Extreme ultraviolet

Extreme ultraviolet lithography

Particles

Photomasks

Scanners

Semiconducting wafers

RELATED CONTENT

EUV mask particle adders during scanner exposure
Proceedings of SPIE (April 06 2015)
EUV mask infrastructure readiness and gaps for TD and HVM
Proceedings of SPIE (November 11 2015)
ASML NXE pellicle update
Proceedings of SPIE (June 27 2019)
Particle on EUV pellicles, impact on LWR
Proceedings of SPIE (October 09 2019)
NXE pellicle offering a EUV pellicle solution to the...
Proceedings of SPIE (March 18 2016)
NXE pellicle: development update
Proceedings of SPIE (September 26 2016)

Back to Top