Sensor information processing in the control of quality parameters of functional coatings of products deposited by vacuum-arc spraying

Sergey N. Grigoriev; Mars S. Migranov; Semen R. Shekhtman; Artur M. Migranov; Artem A. Ershov; Petr M. Pivkin

doi:10.1117/12.2605753

14 November 2021 Sensor information processing in the control of quality parameters of functional coatings of products deposited by vacuum-arc spraying

Sergey N. Grigoriev, Mars S. Migranov, Semen R. Shekhtman, Artur M. Migranov, Artem A. Ershov, Petr M. Pivkin

Author Affiliations +

Proceedings Volume 11914, SPIE Future Sensing Technologies 2021; 119141C (2021) https://doi.org/10.1117/12.2605753
Event: SPIE Future Sensing Technologies, 2021, Online Only

Conference Poster

Abstract

Nanostructured Ti-TiN coatings are one of the most common types of wear-resistant and corrosion-resistant coatings of machine parts and cutting tools. Multicomponent nanostructured coatings were deposited on AISI 318 substrates by vacuum-arc spraying by ion flux ratio for 30-45 seconds with formation of three types of Ti-TiN coatings: three-layer coating, multilayer coating and nanostructured coating. We propose to use the technology of Ti-TiN multilayer coating based on surface modification of the sample by bombarding with a high-current discharge using a “PINK” plasma generator, heating the substrate with ions of cathode material and obtaining cathode material condensation on targets followed by formation of multilayer coating. Target bombarding with an additional ion flux creates active nucleation centers where adsorption occurs and a fine-grained structure is formed. Ion bombardment significantly affects the physical and chemical properties of the sample surface. A detailed research of the change in the relationship of microhardness and adhesion strength of the coating depending on the type of coating of the sample was conducted, and corrosion resistance and wear resistance were investigated by high-precision signal processing from an automatic friction tribometer at a speed of 127 rpm for 60 minutes. As a result of data processing of measuring instruments during control of tribological and physical-mechanical characteristics it was established that formation of nanostructured coatings Ti-TiN with smaller thickness of Ti-TiN layer (30-100 nm) with submicrocrystalline structure allows to improve significantly physicalmechanical characteristics of samples.

Conference Presentation

Citation Download Citation

Sergey N. Grigoriev, Mars S. Migranov, Semen R. Shekhtman, Artur M. Migranov, Artem A. Ershov, and Petr M. Pivkin "Sensor information processing in the control of quality parameters of functional coatings of products deposited by vacuum-arc spraying", Proc. SPIE 11914, SPIE Future Sensing Technologies 2021, 119141C (14 November 2021); https://doi.org/10.1117/12.2605753

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available