Presentation + Paper
20 December 2022 Design of quantum-dot color conversion film for mini-LED backlights
Author Affiliations +
Abstract
Mini-LED backlight and quantum-dot color conversion (QDCC) technology are the research hotspots of emerging display technology. When they are combined together, the luminance uniformity issue may occur because of traditional QDCC film (QDCCF) with uniform thickness. This paper designs and optimizes QDCCFs with non-uniform thickness of cone and circular truncated cone, respectively. The illuminance uniformity is analyzed by simulation. Results show that the illuminance uniformity of the optimized cone and circular truncated cone with a single structure can reach 73.97% and 74.72%, respectively. The single structure with uniform thickness is only 35.84%. After that, the single structure with nonuniform thickness is arrayed with a basic substrate added at the bottom, which is matched with the mini-LED backlight. By optimizing the array configuration and the basic substrate, the illuminance uniformity of the backlight reaches 73.55% and 79.25%, respectively. This QDCCF with non-uniform thickness distribution can effectively improve the illuminance uniformity when mini-LED is combined with QDCCF. This work proposes a new strategy for uniform color conversion of mini-LED display backlights.
Conference Presentation
© (2022) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wenyan Zhang, Xinpei Hu, Yu Chen, Zibin Lin, Enguo Chen, Yun Ye, Sheng Xu, and Tailiang Guo "Design of quantum-dot color conversion film for mini-LED backlights", Proc. SPIE 12315, Optical Design and Testing XII, 1231503 (20 December 2022); https://doi.org/10.1117/12.2642243
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LCDs

Light sources

Light emitting diodes

Organic light emitting diodes

Quantum dots

LED backlight

Light

RELATED CONTENT

Design of directional light source for blue phase LCD
Proceedings of SPIE (November 05 2014)
A study of LED light linear device for light guide...
Proceedings of SPIE (September 21 2007)
LED backlight system with fiber optic red, green, blue to...
Proceedings of SPIE (October 04 2006)
A new design mixing RGB LED (red, green, blue light...
Proceedings of SPIE (September 12 2006)
Embed a linear irregular Fresnel lens into a simple empty...
Proceedings of SPIE (November 27 2012)
LCD backlight light-guide plate design
Proceedings of SPIE (June 09 2006)

Back to Top