Autocollimator for measuring three angular and three linear deformations of industrial structures

Ding Duan Dang; Igor Konyakhin; Renpu Li; Han Xiao

doi:10.1117/12.2643763

19 December 2022 Autocollimator for measuring three angular and three linear deformations of industrial structures

Ding Duan Dang, Igor Konyakhin, Renpu Li, Han Xiao

Proceedings Volume 12319, Optical Metrology and Inspection for Industrial Applications IX; 123191L (2022) https://doi.org/10.1117/12.2643763
Event: SPIE/COS Photonics Asia, 2022, Online Only

Conference Poster

Abstract

Nowadays, linear displacement and angle measuring devices are widely used in the assembly, calibration and deformation monitoring of industrial structures. The Optic-electronic autocollimators for non-contact measurements are highly effective in these cases, since the measurement has a large measuring distance and high accuracy, but the existing autocollimation sensor for measuring angular and linear coordinates consists of two separate measuring systems and two reflectors, respectively. This disadvantage is a major obstacle for determining 6 motion coordinates at a point of the object. Autocollimator is suggested, capable of determining 6 object motion parameters (3 3 rotation angles and 3 linear displacements). The two main components of the autocollimator are the special reflector at the track point of the monitored object and radiating-receiver unit at the rigid base. A specially constructed tetrahedral prism is used as a reflector. Two emission marks are placed directly in front of the radiation receiver objective. Each emission mark after reflecting through the faces of the reflector produces 6 images, so with two emission marks 12 images are produced behind the reflector. The displacement of the object is calculated from the coordinates of the images obtained on the sensor. Mathematical models that determine the displacement of the object based on the image coordinates on the matrix photo receiver have been built. A comparative analysis between the optic-electronic autocollimators and the existing schemes was performed by computer simulation. The simulation results show that the proposed scheme has a smaller error. In addition, the simple and compact structure is also one of their outstanding advantages.

Citation Download Citation

Ding Duan Dang, Igor Konyakhin, Renpu Li, and Han Xiao "Autocollimator for measuring three angular and three linear deformations of industrial structures", Proc. SPIE 12319, Optical Metrology and Inspection for Industrial Applications IX, 123191L (19 December 2022); https://doi.org/10.1117/12.2643763

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available