Poster + Paper
1 May 2023 Modeling of SiNx growth by chemical vapor deposition in nanosheet indentation
Hua Shao, Panpan Lai, Junjie Li, Guobin Bai, Qi Yan, Junfeng Li, Tao Yang, Rui Chen, Yayi Wei
Author Affiliations +
Conference Poster
Abstract
Gate-all-around nanosheet (GAA-NS) transistors are commonly considered to be most competitive logic device in the future. In the GAA nanosheet transistor device fabrication process, the inner spacer formation is a critical step as it physically isolates the gate from the source/drain, and defines the gate length. After the selective lateral etch of the SiGe in alternative Si/SiGe stack, inner spacer material is deposited and SiNx is commonly used. This gap filling process demands for highly uniform growth of materials in order to minimize transistor variability. As moving to three-dimensional stacked structure, lateral open features bring challenges to conventional deposition manners such as chemical vapor deposition (CVD). In our previous work, we have compared the filling performance between low-pressure chemical vapor deposition (LPCVD) and plasma enhanced chemical vapor deposition (PECVD), and demonstrated good SiNx growth conformity by LPCVD in Si/SiGe indentation cavities. The cavity geometry was also found to pose significant impact on growth profile. However these works were carried out on isolated Si/SiGe nanosheet structure without neighboring unit. CVD process performance may degrade when moving from isolated to dense structures, especially when the critical dimension goes into tens of nanometers. In this paper, we present our latest simulation progress on the profile evolution of SiNx CVD in dense Si/SiGe nanosheet structures with varying geometry and density of units. The SiNx profile simulation indicates that LPCVD still maintains promising coverage performance in cavities, the SiNx film thickness in the inner and outer side of unit are pretty close, while necking signature emerges near the unit top as process time increases. In contrast, PECVD exhibits pin holes within the cavity at the beginning of process, and the necking effect is relatively severe both in the cavity and near top of unit. We conduct systematic study on periodic stack structure array with different SiGe indentations. Pin holes are observed and get more pronounced in the PECVD process when the space between units is narrowed down. As the indentation decreases, pin holes become much smaller and exhibit better filling performance inside the lateral cavity.
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hua Shao, Panpan Lai, Junjie Li, Guobin Bai, Qi Yan, Junfeng Li, Tao Yang, Rui Chen, and Yayi Wei "Modeling of SiNx growth by chemical vapor deposition in nanosheet indentation", Proc. SPIE 12499, Advanced Etch Technology and Process Integration for Nanopatterning XII, 124990L (1 May 2023); https://doi.org/10.1117/12.2658152
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Plasma enhanced chemical vapor deposition

Low pressure chemical vapor deposition

Silicon nitride

Chemical vapor deposition

Nanosheets

Monte Carlo methods

Modeling

Back to Top