Poster + Paper
27 November 2023 Fabrication of chirped and tilted fiber Bragg gratings for single-mode fiber lasers
Chunquan Hong, Lin Zhang, Jiarong Zheng, Huailiang Liu, Xiuquan Ma
Author Affiliations +
Conference Poster
Abstract
In this paper, we propose that a Chirped and Tilted Fiber Bragg Grating (CTFBG) can be fabricated in the 14um-core fiber to suppress SRS to achieve a higher-power single-mode fiber laser. The results show that the CTFBGs can suppress the SRS about 25 dB, and the power of the 14um-core single-mode fiber laser can be improved to 3 kW. The M2 of the laser is less than 1.20. The CTFBGs are fabricated with an excimer laser and the heating rate of the recoated CTFBGs are less than 0.01 °C/W. The research results have certain significance for suppressing SRS in high-power single-mode fiber lasers with CTFBG for improving the output power.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Chunquan Hong, Lin Zhang, Jiarong Zheng, Huailiang Liu, and Xiuquan Ma "Fabrication of chirped and tilted fiber Bragg gratings for single-mode fiber lasers", Proc. SPIE 12760, Advanced Lasers, High-Power Lasers, and Applications XIV, 1276015 (27 November 2023); https://doi.org/10.1117/12.2687143
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Single mode fibers

Fiber Bragg gratings

Optical filters

Tunable filters

Raman scattering

Laser scattering

RELATED CONTENT

Towards high-power random fiber laser
Proceedings of SPIE (November 18 2014)
SRS modeling in high power CW fiber lasers for component...
Proceedings of SPIE (February 22 2017)
Design of a narrow band 589 nm laser by direct...
Proceedings of SPIE (June 27 2006)
Brillouin-erbium fiber laser with a Sagnac loop filter
Proceedings of SPIE (November 21 2007)

Back to Top