Electrical ground support equipment for the ESA NewAthena Wide Field Imager

Francisco Javier Veredas; Sebastian Albrecht; Robert Andritschke; Günter Hauser; Andreas Lederhuber; Marko Mecina; Kirpal Nandra; Roland Ottensamer; Hermine Schnetler

doi:10.1117/12.3018654

21 August 2024 Electrical ground support equipment for the ESA NewAthena Wide Field Imager

Francisco Javier Veredas, Sebastian Albrecht, Robert Andritschke, Günter Hauser, Andreas Lederhuber, Marko Mecina, Kirpal Nandra, Roland Ottensamer, Hermine Schnetler

Author Affiliations +

Proceedings Volume 13093, Space Telescopes and Instrumentation 2024: Ultraviolet to Gamma Ray; 130934B (2024) https://doi.org/10.1117/12.3018654
Event: SPIE Astronomical Telescopes + Instrumentation, 2024, Yokohama, Japan

Conference Poster

Abstract

The Wide Field Imager (WFI) is one of the two instruments of the X-ray Advanced Telescope for High-Energy Astrophysics (NewAthena) mission selected by ESA. The WFI satellite telescope uses a camera fitted with DEPFET sensors, instrument electronics to control the camera and readout the sensors, as well as additional electronic units to communicate with the spacecraft on-board-computer. WFI successfully passed the instrument system requirement review (I-SRR) in March 2022. In 2023, NewAthena went through a redefinition phase in order to save cost, and on February 2024 the mission restarted again. Currently, a WFI Engineering Model (EM) consisting of the Camera Head Sub-System (CHS) and Detector Electronics Sub-System (DES) is being developed. A Structural and Thermal Model (STM) has also been created as an intermediate development step to gain design insights with respect to thermal and structural properties. The objective of these developments is to gain knowledge on the road to develop the WFI Flight Model (FM). Mechanical and environmental tests will be performed at the X4 and PUMA test facilities of the Max Planck Institute for Extraterrestrial Physics. In this paper, we present the electrical ground support equipment (EGSE) for WFI and in particular for these tests. The WFI EGSE consist of hardware and software to test the WFI instrument. It provides power control, temperature sensing, time synchronization, an interface to program FPGAs and microcontrollers, and the software necessary to control the instrument and acquire the science data. Dedicated telemetry and telecommand software tools have been developed to communicate via the SpaceWire interface with the WFI instrument. The software architecture and EGSE design trade-offs are also presented.

(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Francisco Javier Veredas, Sebastian Albrecht, Robert Andritschke, Günter Hauser, Andreas Lederhuber, Marko Mecina, Kirpal Nandra, Roland Ottensamer, and Hermine Schnetler "Electrical ground support equipment for the ESA NewAthena Wide Field Imager", Proc. SPIE 13093, Space Telescopes and Instrumentation 2024: Ultraviolet to Gamma Ray, 130934B (21 August 2024); https://doi.org/10.1117/12.3018654

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available