Paper
1 June 1991 Resist design for dry-developed positive working systems in deep-UV and e-beam lithography
Francoise Vinet, Michele Chevallier, Christophe Pierrat, Jean Charles Guibert, Charles Rosilio, B. Mouanda, A. Rosilio
Author Affiliations +
Abstract
A positive working system, using silylation and dry development has been proposed. This system called 'PRIME' (Positive Resist IMage by dry Etching) is dedicated to e-beam and deep UV lithography. Due to high contrast and top image scheme, a wide process latitude is obtained. However, the exposure does required for resist crosslinking is high. This dose is about 300 mj/cm2. So, in order to decrease it, resist formulations have been investigated such as chlorinated and chloromethylated novolaks, grafted p-tertiobutylphenol-formol novolak, polyhydroxystyrene and copolymers poly hydroxystyrene/poly(chlorinated or chloromethylated styrene) with deep UV sensitive groups. This paper will include synthesis of previously described resist formulations, ability of these formulations to deep UV crosslinking and preliminary results of their application to PRIME process.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Francoise Vinet, Michele Chevallier, Christophe Pierrat, Jean Charles Guibert, Charles Rosilio, B. Mouanda, and A. Rosilio "Resist design for dry-developed positive working systems in deep-UV and e-beam lithography", Proc. SPIE 1466, Advances in Resist Technology and Processing VIII, (1 June 1991); https://doi.org/10.1117/12.46404
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Deep ultraviolet

Polymers

Electron beam lithography

Lithography

Photoresist processing

Chlorine

Image processing

Back to Top