Paper
1 December 1978 A Comparison Between Optimised Spheric And Aspheric Optical Systems For The Thermal Infrared
Philip J. Rogers
Author Affiliations +
Abstract
Modern computers and optimisation programs have made the design of unconventional optical systems such as those containing aspheric surfaces relatively straightforward. For thermal infrared systems, where materials are expensive and transmission important, there is an understandable feeling amongst designers that aspherics should be employed, provided that their use results in a reduction in the number of lens elements required for a given system. Much can be achieved with spheric optics however; indeed it is arguable that the use of only spherical optics represents a greater design challenge. Therefore, considering their relative difficulty of manufacture and testing, the choice of aspheric rather than spheric surfaces requires some justification. This paper gives a summary of the results of a short investigation into optimised spheric and aspheric optical systems of comparable performance for use in the 8 to 13 micron bandwidth. Applications covered are:- pyrovidicon objectives of high aperture (N.A. = 0.78); catadioptric objectives; and afocal telescopes.
© (1978) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Philip J. Rogers "A Comparison Between Optimised Spheric And Aspheric Optical Systems For The Thermal Infrared", Proc. SPIE 0147, Computer-Aided Optical Design, (1 December 1978); https://doi.org/10.1117/12.956634
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aspheric lenses

Chemical elements

Mirrors

Germanium

Spherical lenses

Objectives

Optical design

RELATED CONTENT

Role of asphericity in optical design
Proceedings of SPIE (October 01 1990)
OWL optical design, active optics, and error budget
Proceedings of SPIE (July 20 2000)
Preliminary optical design for a 4.0 m f 2.19 prime...
Proceedings of SPIE (January 30 2003)
Design techniques for systems containing tilted components
Proceedings of SPIE (August 27 1999)

Back to Top