Paper
1 February 1992 Optimizing gain and noise performance of EDFAs with insertion of a filter or an isolator
Joern Hedegaard Povlsen, Anders Bjarklev, Ole Lumholt, Helle Vendeltorp-Pommer, Karsten Rottwitt, Thomas P. Rasmussen
Author Affiliations +
Abstract
Filters and isolators placed within the EDFA's can be used to increase the gain , and decrease the noise figure. By use of an accurate model the placement of the filters and isolators are optimized. The optimization are performed for situations with pump lasers emittiing at 0.980?m and 1.480?m and signal wavelengths at either the emission cross section peak near 1.530?m or at the silica loss minimum around 1.550?m.
© (1992) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joern Hedegaard Povlsen, Anders Bjarklev, Ole Lumholt, Helle Vendeltorp-Pommer, Karsten Rottwitt, and Thomas P. Rasmussen "Optimizing gain and noise performance of EDFAs with insertion of a filter or an isolator", Proc. SPIE 1581, Fiber Laser Sources and Amplifiers III, (1 February 1992); https://doi.org/10.1117/12.134976
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical isolators

Optical filters

Optical amplifiers

Fiber amplifiers

Electronic filtering

Amplifiers

Fiber lasers

Back to Top