Paper
29 November 1993 Precision alignment of the advanced light source U5.0 and U8.0 undulators
David E. Humphries, John Chin, Raymond F. Connors, J. Cummings, T. Keffler, W. Gath, Egon H. Hoyer, Brian M. Kincaid, P. Pipersky
Author Affiliations +
Abstract
The U5.0 and U8.0 undulators for the Advanced Light Source incorporate 4.6-m-long, hybrid- configuration magnetic structures. The structures consist of modules with half-period pole assemblies mounted on 0.8-m-long aluminum mounts, which are in turn attached to continuous steel backing beams. The vertical and longitudinal alignment tolerances for the poles of these structures are 25 microns and 50 microns, respectively, over the entire 4.6-m length of the devices. To meet these tolerances, the modules were first aligned individually using an automated coordinate measurement machine and shimming techniques. Several adjustment iterations were required for each module. Averaging and 3D linear least-squares fitting techniques were employed to establish statistically based error reference planes. Graphical spread sheets were used to create representations of vertical and longitudinal pole position errors for alignment.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
David E. Humphries, John Chin, Raymond F. Connors, J. Cummings, T. Keffler, W. Gath, Egon H. Hoyer, Brian M. Kincaid, and P. Pipersky "Precision alignment of the advanced light source U5.0 and U8.0 undulators", Proc. SPIE 2013, Electron-Beam Sources of High-Brightness Radiation, (29 November 1993); https://doi.org/10.1117/12.164789
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Magnetism

Aluminum

Tolerancing

Light sources

Assembly tolerances

Distortion

Interferometers

Back to Top