Characterization of the behavior of ceramic materials submitted to UV laser radiation: applications to surface treatment

Christophe Prat; Gines Nicolas Costa; Michel L. Autric

doi:10.1117/12.204984

31 March 1995 Characterization of the behavior of ceramic materials submitted to UV laser radiation: applications to surface treatment

Christophe Prat, Gines Nicolas Costa, Michel L. Autric

Author Affiliations +

Proceedings Volume 2502, Gas Flow and Chemical Lasers: Tenth International Symposium; (1995) https://doi.org/10.1117/12.204984
Event: Gas Flow and Chemical Lasers: Tenth International Symposium, 1994, Friedrichshafen, Germany

Abstract

Due to their fabrication process, the ceramic materials usually exhibit a granulary surface. That leads to a non negligible roughness and porosity, in so far as the intergranular interstices could be regarded as pores. On the other hand, the hardness of such materials makes the processing (polishing for instance) somewhat difficult. The purpose of this work is the surface modification of different ceramic samples using UV laser radiations in order to improve the tribological properties of the workpieces. Experiments have been performed on alumina (Al₂O₃), aluminum nitride (AIN) and silicon carbide (SiC) in order to determine the influence of different parameters on the roughness and porosity of their surface. Three laser wavelengths (193 nm, 248 nm and 308 nm), a range of energy density up to 8 J/cm², a pulse duration of 25 ns and different repetition rates (1 - 200 Hz) were the experimental parameters. Results concerning roughness were analyzed using a mechanical profilometer. The photographs of treated surfaces obtained by scanning electron microscopy have been numerized; the porosity of the material has been measured by image processing. For instance, in case of alumina, we obtain a 90 surf.% decrease of porosity after laser treatment (2 J/cm²). At such a fluence, the interstices (which typical width is about 1 micrometers ) are no more visible, resulting in a minimal porosity in spite of the appearance of numerous circular pores and microcracks. A good choice of laser parameters allows us to obtain a significant improvement of the surface: the granular structure and microcracks no longer appear. Absorptivity was determined at 248 nm using a thermocouple.

Citation Download Citation

Christophe Prat, Gines Nicolas Costa, and Michel L. Autric "Characterization of the behavior of ceramic materials submitted to UV laser radiation: applications to surface treatment", Proc. SPIE 2502, Gas Flow and Chemical Lasers: Tenth International Symposium, (31 March 1995); https://doi.org/10.1117/12.204984

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available