Paper
8 April 1996 Laser welding melt efficiency comparison: cw and Q-switched Nd:YAG
T. C. Webber
Author Affiliations +
Abstract
Investigators use melt efficiency to gain understanding of a very dynamic process. The results can be quite useful in the quest to understand the mechanisms of laser welding as well as providing a basis unto which a prediction can be made as to the outcome of a particular parameter set. This analysis utilizes the physical constants of the material to be studied, the weld section area, and other pertinent parameters. It is widely assumed that laser welding is an average power process, in other words, that the physical constants of metal integrate peak energies to produce a net result. To test this assumption, a study was conducted to compare the melt efficiency of continuous wave Nd:YAG laser to a similarly powered Q-Switched Nd:YAG laser. Conditions of the weld test were kept virtually identical. A range of weld speeds were examined. The operating parameters of the Q-Switched laser were varied over several frequency and peak energy values. The results of the study contradicts the assumption of the average power process: melt efficiency increased with increased peak energies.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. C. Webber "Laser welding melt efficiency comparison: cw and Q-switched Nd:YAG", Proc. SPIE 2703, Lasers as Tools for Manufacturing of Durable Goods and Microelectronics, (8 April 1996); https://doi.org/10.1117/12.237724
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser welding

Continuous wave operation

Nd:YAG lasers

Fusion energy

Q switched lasers

Plasma

Energy efficiency

RELATED CONTENT

Q-switched Nd:YAG laser engraving
Proceedings of SPIE (April 30 1998)
Comparative study of aluminum and steel welding with cw and...
Proceedings of SPIE (September 23 1996)
LD-pumped high-efficiency Nd:YAG ceramic laser
Proceedings of SPIE (January 26 2005)
Modification of an ophthalmic laser for micro-joining on MEMS
Proceedings of SPIE (February 23 2008)
Welding of aluminum alloys by combined radiation
Proceedings of SPIE (April 30 2002)
Aluminum laser welding optimization
Proceedings of SPIE (April 12 2007)

Back to Top