Paper
2 May 1997 Effect of wavelength detuning on spectral and temperature characteristics of 1.3-um DFB lasers
Seung Jo Jeong, Jung Koo Kang, K. S. Oh, Byung Kwon Kang, Tae-Jin Kim, Y. K. Sin
Author Affiliations +
Abstract
Spectral characteristics of 1.3 micrometers DFB lasers with different wavelength detunings are investigated at various temperatures ranging from 20 to 80 degree(s)C. DFB lasers have different amounts of detuning at RT: almost no detuning, a positive detuning of 5 nm and a negative detuning of 25 nm. AR-HR coated 300 micrometers long DFB lasers have typical CW threshold currents of 9 mA, slope efficiencies of 0.27 mW/mA, and coupling coefficients (K) of 60 cm-1. For the DFB LD with a positive detuning, the detuning of +5 nm at 20 degree(s)C is changed to -15 nm at 80 degree(s)C with the SMSR of 38 dB maintained. Whereas, at 80 degree(s)C Fabry-Perot modes appear from the DFB LD with a negative detuning and a smaller SMSR of 35 dB is obtained from the DFB LD with almost no detuning. These results indicate that a DFB LD with a positive detuning shows better spectral characteristics than others.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seung Jo Jeong, Jung Koo Kang, K. S. Oh, Byung Kwon Kang, Tae-Jin Kim, and Y. K. Sin "Effect of wavelength detuning on spectral and temperature characteristics of 1.3-um DFB lasers", Proc. SPIE 3001, In-Plane Semiconductor Lasers: from Ultraviolet to Midinfrared, (2 May 1997); https://doi.org/10.1117/12.273810
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Continuous wave operation

Fabry–Perot interferometers

Laser damage threshold

Oxides

Cladding

Etching

Back to Top