Piezoelectric ceramic-polymer composites for weigh-in-motion sensors

Rajesh K. Panda; Patrick J. Szary; Ali Maher; Ahmad Safari

doi:10.1117/12.316855

20 July 1998 Piezoelectric ceramic-polymer composites for weigh-in-motion sensors

Rajesh K. Panda, Patrick J. Szary, Ali Maher, Ahmad Safari

Proceedings Volume 3324, Smart Structures and Materials 1998: Smart Materials Technologies; (1998) https://doi.org/10.1117/12.316855
Event: 5th Annual International Symposium on Smart Structures and Materials, 1998, San Diego, CA, United States

Abstract

Piezoelectric materials produce a voltage proportional to an applied pressure. Using this phenomenon, piezoelectric polymer sensors are already being used for collecting traffic data including weight-in-motion, measuring speeds and counting axles. The polymer sensors are usually in the form of a long tape or cable embedded within long blocks of elastomeric material. These sensor assemblies are then installed into grooves, which are cut into roads perpendicular to the traffic flow. The biggest disadvantage of these sensors is that the piezoelectric output is not uniform with temperature, thus leading to large uncertainty in the data collected. Piezoelectric ceramics have a much more stable response over a large temperature range. However, until now they have not been used for traffic data sensors because of their inherent brittleness. In this research project flexible ceramic/polymer composite strips have been fabricated for use as piezoelectric sensors for measuring large vehicle loads. Here, the ceramic is the active piezoelectric material that is embedded in a flexible non-piezoelectric polymer. After encapsulating these sensors in elastomeric blocks in aluminum channels, the voltage output of the composite for different loads have been determined. Also, these composite sensor assemblies are being installed on a test road in order to perform actual measurements.

Citation Download Citation

Rajesh K. Panda, Patrick J. Szary, Ali Maher, and Ahmad Safari "Piezoelectric ceramic-polymer composites for weigh-in-motion sensors", Proc. SPIE 3324, Smart Structures and Materials 1998: Smart Materials Technologies, (20 July 1998); https://doi.org/10.1117/12.316855

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available