Novel volume fraction gradient and oriented piezoelectric composites for medical imaging applications

Rajesh K. Panda; T. Raj Gururaja; Stephen C. Danforth; Ahmad Safari

doi:10.1117/12.308001

1 May 1998 Novel volume fraction gradient and oriented piezoelectric composites for medical imaging applications

Rajesh K. Panda, T. Raj Gururaja, Stephen C. Danforth, Ahmad Safari

Proceedings Volume 3341, Medical Imaging 1998: Ultrasonic Transducer Engineering; (1998) https://doi.org/10.1117/12.308001
Event: Medical Imaging '98, 1998, San Diego, CA, United States

Abstract

In ultrasonic medical imaging it is desirable to have the maximum beam sensitivity along the transmission axis. However, the presence of gratin and side lobes greatly affects the transducer performance. It is known that the grating lobes can be reduced by non-uniform spacing of elements in the composite. In spite of this knowledge, it has been found to be difficult to fabricate piezocomposites with complex designs using traditional processing routes. The ceramic element spacing can be varied easily using solid freeform fabrication (SFF) techniques. In this work SFF techniques, including Sanders Prototyping (SP) and fused deposition of ceramics were used to make many novel piezoelectric ceramic/polymer composite transducers. A variety of 2-2 PZT-5H/spurr epoxy volume fraction gradient samples have been fabricated. Many mathematical functions, including linear, gaussian and exponential gradients were designed using Pro Engineer software. Novel oriented composites have also been fabricate where the ceramic elements are at an angle to the thickness direction. The piezoelectric properties are found to change with the orientation of piezoelectric rods. The optimum properties have been observed at an orientation of 30 degrees to the vertical where the total contribution from the d₃₃, d₃₁ and d₁₅ components could be the highest. These oriented composites may be used to focus the acoustic beam at a point by varying the orientation angle of the rods within the same composite. The design, fabrication and electromechanical properties of these composites are discussed in this paper.

Citation Download Citation

Rajesh K. Panda, T. Raj Gururaja, Stephen C. Danforth, and Ahmad Safari "Novel volume fraction gradient and oriented piezoelectric composites for medical imaging applications", Proc. SPIE 3341, Medical Imaging 1998: Ultrasonic Transducer Engineering, (1 May 1998); https://doi.org/10.1117/12.308001

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
10 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Composites

Ceramics

Transducers

Ferroelectric materials

Polymers

Fabrication

Acoustics

Show All Keywords

Keywords/Phrases

Search In:

Publication Years