Paper
24 July 1998 Metrology for spatial interferometry V
Author Affiliations +
Abstract
The proposed Space Interferometry Mission (SIM) spacecraft designs include high resolution stellar interferometers for micro-arc-second accuracy astrometric measurements. The stellar interferometers require picometer accuracy 1D metrology gauges, surface metrology gauges and 3D metrology gauges to measure the required distances or to calibrate the fiducials that define the end points of the interferometric paths. The absolute metrology gauges required by these interferometers can be considerably less accurate due to the careful design of the astrometric interferometers and the fiducials on the spacecraft. An auto-aligning, 3D metrology gauge constructed using the sub-picosecond linear metrology gauges was described in earlier papers. The sub-nanometer, in-vacuum tracking result from this 3D metrology gauge are presented. The resulting jitter is analyzed and is shown to be caused by thermal drift in the alignment of the gauge heads, warpage of the base table and the time-dependent tilt of the experiment as a whole. The aberrations in the light beams of the laser distance gauges can result in errors in the distance measurements performed using these gauges. Simulations using spot shapes and aberrations present in a realistic measurement system used in a stellar interferometer is space are performed to quantify the amount of expected errors. The results of these simulations are presented.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yekta Gursel "Metrology for spatial interferometry V", Proc. SPIE 3350, Astronomical Interferometry, (24 July 1998); https://doi.org/10.1117/12.317175
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Metrology

Head

Motion measurement

Raster graphics

Interferometers

Distance measurement

Interferometry

RELATED CONTENT

Metrology for spatial interferometry III
Proceedings of SPIE (October 12 1996)
Metrology for spatial interferometry IV
Proceedings of SPIE (October 01 1997)
Developments in 2D AFM metrology
Proceedings of SPIE (August 04 1993)
Noncoherent light interferometry as a thickness gauge
Proceedings of SPIE (January 11 1999)

Back to Top