Paper
8 October 1999 Electrochromic performance of sol-gel-deposited CeO2 films
Nilgun Ozer, John P. Cronin, Sevim Akyuz
Author Affiliations +
Abstract
Ceria (CeO2) films were prepared by a sol-gel technique onto fluorine doped tin oxide coated glass substrates. The coating solution was derived from cerium ammonium nitrate dissolved in ethanol with diethanolamine used as a complexing agent. Lithium intercalating properties of the films were investigated using cyclic voltammetry (CV) and UV-visible spectroscopy. The electrochemical examinations were performed in a 0.5 M LiClO4 propylene carbonate electrolyte. The additional film characterizations were performed in X-ray diffractometry (XRD), x-ray photoelectron spectroscopy, scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy. XRD of the films showed that they had an cerianite structure for heat treatment temperatures at or above 450 degree(s)C. The SEM examinations showed that the surface texture was uniform and homogeneous. CV examinations showed a reversible electrochemical insertion or extraction of Li+/e- ions maintaining a high optical transmissivity. Spectroelectrochemistry showed that these films can be used as optically passive counter-electrode in transmissive electrochromic devices.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nilgun Ozer, John P. Cronin, and Sevim Akyuz "Electrochromic performance of sol-gel-deposited CeO2 films", Proc. SPIE 3788, Switchable Materials and Flat Panel Displays, (8 October 1999); https://doi.org/10.1117/12.365776
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Coating

Cerium

Scanning electron microscopy

Oxides

FT-IR spectroscopy

Sol-gels

Electrodes

RELATED CONTENT


Back to Top