Paper
16 July 2001 Conducting polymer, carbon nanotube, and hybrid actuator materials
Geoffrey M. Spinks, Gordon G. Wallace, Christopher D. Carter, Dezhi Zhou, Leonard S. Fifield, Clint R. Kincaid, Ray H. Baughman
Author Affiliations +
Abstract
The electromechanical actuation performance of carbon nanotube mats, polypyrrole films and hybrid nanotube-polypryrrole materials has been compared. The hybrid materials were formed by coating nanotube mats with polypyrrole using vapour deposition and electropolymerisation techniques. When the coating time was short, the hybrid materials showed the electrochemical responses typical of polypyrrole and retained the porous structure of the nanotube mats. The actuator response of the different materials was determined isotonically at different applied loads. The nanotube mat and hybrid materials gave actuator strains that were largely insensitive to the applied stress up to ~ 10 MPa. The hybrid materials were virtually identical to the uncoated nanotube mats in terms of actuator performance. A simple model showed that the actuator strain depends upon the difference in elastic modulus of the actuator material in the doped and undoped states.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Geoffrey M. Spinks, Gordon G. Wallace, Christopher D. Carter, Dezhi Zhou, Leonard S. Fifield, Clint R. Kincaid, and Ray H. Baughman "Conducting polymer, carbon nanotube, and hybrid actuator materials", Proc. SPIE 4329, Smart Structures and Materials 2001: Electroactive Polymer Actuators and Devices, (16 July 2001); https://doi.org/10.1117/12.432646
Lens.org Logo
CITATIONS
Cited by 17 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Polymers

Coating

Carbon nanotubes

Ions

Polymeric actuators

Electrodes

Back to Top