Research progress on a focal plane array ladar system using a laser diode transmitter and FM/cw radar principles

Barry L. Stann; Ahmed Abou-Auf; Keith Aliberti; Mark M. Giza; Greg Ovrebo; William C. Ruff; Deborah R. Simon; Michael R. Stead

doi:10.1117/12.476412

29 July 2002 Research progress on a focal plane array ladar system using a laser diode transmitter and FM/cw radar principles

Barry L. Stann, Ahmed Abou-Auf, Keith Aliberti, Mark M. Giza, Greg Ovrebo, William C. Ruff, Deborah R. Simon, Michael R. Stead

Author Affiliations +

Proceedings Volume 4723, Laser Radar Technology and Applications VII; (2002) https://doi.org/10.1117/12.476412
Event: AeroSense 2002, 2002, Orlando, FL, United States

Abstract

The Army Research Laboratory is developing scannerless ladar systems for smart munition and reconnaissance applications. Here we report on progress attained over the past year related to the construction of a 32x32 pixel ladar. The 32x32 pixel architecture achieves ranging based on a frequency modulation/continuous wave (FM/cw) technique implemented by directly amplitude modulating a near-IR diode laser transmitter with a radio frequency (rf) subcarrier that is linearly frequency modulated. The diode's output is collected and projected to form an illumination field in the downrange image area. The returned signal is focused onto an array of metal-semiconductor-metal (MSM) detectors where it is detected and mixed with a delayed replica of the laser modulation signal that modulates the responsivity of each detector. The output of each detector is an intermediate frequency (IF) signal (a product of the mixing process) whose frequency is proportional to the target range. This IF signal is continuously sampled over each period of the rf modulation. Following this, a N channel signal processor based-on field-programmable gate arrays calculates the discrete Fourier transform over the IF waveform in each pixel to establish the ranges to all the scatterers and their respective amplitudes. Over the past year, we have built one and two-dimensional self-mixing MSM detector arrays at .8 and 1.55 micrometers , designed and built circuit boards for reading data out of a 32x32 pixel array, and designed an N channel FPGA signal processor for high-speed formation of range gates. In this paper we report on the development and performance of these components and the results of system tests conducted in the laboratory.

Citation Download Citation

Barry L. Stann, Ahmed Abou-Auf, Keith Aliberti, Mark M. Giza, Greg Ovrebo, William C. Ruff, Deborah R. Simon, and Michael R. Stead "Research progress on a focal plane array ladar system using a laser diode transmitter and FM/cw radar principles", Proc. SPIE 4723, Laser Radar Technology and Applications VII, (29 July 2002); https://doi.org/10.1117/12.476412

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available