Paper
26 November 2002 Enhanced performances of InGaN-based light-emitting diode by a micro-roughened p-GaN surface using metal clusters
Chul Huh, Kug-Seung Lee, Seong-Ju Park
Author Affiliations +
Abstract
InGaN-based light-emitting diode with a micro-roughened top surface using the metal clusters as wet etch masks was investigated. The forward voltage, VF, at 20 mA for InGaN/GaN MQW LED chip with a mirco-roughened top surface was improved compared to that of the conventional InGaN/MQW LED chip. This result could be attributed to the improved metal contact on p-GaN due to an increased contact area between the metal and p-GaN layer. Furthermore, the light-output power for InGaN/GaN MQW LED with micro-roughened top p-GaN surface was increased compared to that for the conventional InGaN/GaN MQW LED chip. This indicate that the scattering of photons emitted in the MQW active layer was much enhanced at the micro-roughened top p-GaN surface of LED due to the angular randomization of photons inside the LED structureu, resulting in an increase in the probability of escaping from the LED structure.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chul Huh, Kug-Seung Lee, and Seong-Ju Park "Enhanced performances of InGaN-based light-emitting diode by a micro-roughened p-GaN surface using metal clusters", Proc. SPIE 4776, Solid State Lighting II, (26 November 2002); https://doi.org/10.1117/12.452565
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Metals

Photons

Platinum

Resistance

Wet etching

Etching

Back to Top