Paper
29 July 2002 Simultaneous measurements of optical and thermal properties of solids at laser heating up to 2500 degrees C
Olga G. Tsarkova, Serge V. Garnov, Vitali I. Konov, E. N. Lubnin, Friedrich Dausinger
Author Affiliations +
Proceedings Volume 4900, Seventh International Symposium on Laser Metrology Applied to Science, Industry, and Everyday Life; (2002) https://doi.org/10.1117/12.484547
Event: Seventh International Symposium on Laser Metrology Applied to Science, Industry, and Everyday Life, 2002, Novosibirsk, Russian Federation
Abstract
Detailed studies of optical and thermal properties of solids are necessary for fundamental science as well as for optimization of technologies of laser processing of materials. The essential temperature dependences of the physical parameters of solids strongly influence the laser-matter interaction processes. The advantage of our experimental technique is the possibility to perform simultaneous measurements of reflectivity, absorptivity, transmissivity, heat capacity, heat conductivity, temperature conductivity of solids in a broad range of investigated temperatures (up to 2500°C) with high temporal resolution (0.5 ms). Besides, the developed method allows to estimate values of heat of phase transitions and to reveal the influence of ambient atmosphere on the physical properties of samples undergoing noticeable structural and chemical modifications during laser heating. A possibility to record both the optical and thermal properties and temperature dependences of metals, ceramics, CVD (chemical vapor deposition) diamond films within a single experiment (for a few seconds) allows to apply this technique for studying and selecting novel materials with unknown properties.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Olga G. Tsarkova, Serge V. Garnov, Vitali I. Konov, E. N. Lubnin, and Friedrich Dausinger "Simultaneous measurements of optical and thermal properties of solids at laser heating up to 2500 degrees C", Proc. SPIE 4900, Seventh International Symposium on Laser Metrology Applied to Science, Industry, and Everyday Life, (29 July 2002); https://doi.org/10.1117/12.484547
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ceramics

Temperature metrology

Thermography

Solids

Aluminum

Optical testing

Reflectivity

Back to Top