Paper
25 July 2003 Effect of device parameters on the bandwidth calculations of ultrahigh-speed optical modulators
Author Affiliations +
Abstract
The effect of velocity matching, impedance matching, conductor loss and dielectric loss on the optical bandwidth of an ultra-high-speed lithium niobate (LN) modulator is reported by using the finite element method. It is shown that for an etched LN modulator the product VπL could be reduced by 30% and it is also relatively easier to match both Nm and Zc simultaneously. The work indicates that both the dielectric loss and impedance matching play a key role for velocity matched high-speed modulators along with the low conductor loss. The effects of etch depth, buffer thickness, electrode width and the gap between the electrodes on device performance are also illustrated.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
B. M. Azizur Rahman, Shyqyri Haxha, and Kenneth T. V. Grattan "Effect of device parameters on the bandwidth calculations of ultrahigh-speed optical modulators", Proc. SPIE 4986, Physics and Simulation of Optoelectronic Devices XI, (25 July 2003); https://doi.org/10.1117/12.474372
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Modulators

Dielectrics

Microwave radiation

Waveguides

Optical modulators

Finite element methods

RELATED CONTENT


Back to Top