Paper
2 June 2003 New sensing wafer technique for artifact-free transient temperature measurements in PEB processes
Mei H. Sun, Barney M Cohen, Farhat Quli, Wayne G. Renken
Author Affiliations +
Abstract
A system for monitoring the transient and steady state temperature profiles during the deep UV (DUV) post exposure bake (PEB) is described. The system, called Accura°C, consists of a sensor wafer, a wireless electronics unit and software on a laptop computer. To monitor temperature platinum resistance temperature detectors (RTDs) are embedded into silicon wafers. A flexible high temperature printed circuit (PC) ribbon cable connects the wireless electronics unit to the wafer. The system robot moves both the sensor wafer and electronics unit through the system. Communication between the electronics unit and a laptop computer is accomplished by a Bluetooth RF link. The RF link enables the laptop computer to analyze the temperature measurements in real time. The rechargeable batteries in the electronics unit allow detailed examination of all process chambers. Further the long operating time and real time data stream provide for bake chamber optimization such as tuning. The sensor integration into the wafer provides accurate, artifact free measurements of the rapid temperature changes during PEB ramps.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mei H. Sun, Barney M Cohen, Farhat Quli, and Wayne G. Renken "New sensing wafer technique for artifact-free transient temperature measurements in PEB processes", Proc. SPIE 5038, Metrology, Inspection, and Process Control for Microlithography XVII, (2 June 2003); https://doi.org/10.1117/12.485039
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconducting wafers

Temperature metrology

Sensors

Electronics

Silicon

Deep ultraviolet

Calibration

Back to Top