Paper
1 July 2004 Model predictions and measured skin damage thresholds for 1.54-μm laser pulses in porcine skin
Author Affiliations +
Abstract
A new source-term thermal model was used to determine the skin temperature rise using porcine skin parameters for various wavelengths, pulse durations, and laser spot sizes and is compared to the Takata thermal model. Expanding on this preliminary source-term model using a Gaussian profile to describe the spatial extent of laser pulse interaction in skin, we report on the coupling of temporal consideration to the model. Computer simulation of the new source-term model and the Takata thermal model are presented to highlight the theoretical extent of thermal damage. Laser exposures of 1.54 μm, 0.60 ms in duration and using spot sizes of 0.7 mm and 1.0 mm were applied to the porcine skin. The damage thresholds were determined at 1 hour and 24 hours post-exposures using probit analysis. The ED50 for these skin exposures at 24 hours post-exposure were 20 J/cm2and 8.1 J/cm2respectively. These damage thresholds are compared with our model predictions and another thermal model with the damage integral predicting damage levels. They are also compared with previously published skin thresholds and with the ANSI Standard’s MPE for 1540 nm lasers at 0.60 ms.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William P. Roach, Clarence Cain, Kurt Schuster, Kevin Stockton, David Stolarski, Robert Galloway, and Benjamin A. Rockwell "Model predictions and measured skin damage thresholds for 1.54-μm laser pulses in porcine skin", Proc. SPIE 5319, Laser Interaction with Tissue and Cells XV, (1 July 2004); https://doi.org/10.1117/12.529398
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Skin

Thermal modeling

Laser damage threshold

Pulsed laser operation

Neodymium

Laser safety

Mathematical modeling

Back to Top