Mercuric iodide medical imagers for low-exposure radiography and fluoroscopy

George Zentai; Larry Partain; Raisa Pavlyuchkova; Cesar Proano; Barry N. Breen; A. Taieb; Ofer Dagan; Michael Schieber; Haim Gilboa; Jerry Thomas

doi:10.1117/12.535948

6 May 2004 Mercuric iodide medical imagers for low-exposure radiography and fluoroscopy

George Zentai, Larry Partain, Raisa Pavlyuchkova, Cesar Proano, Barry N. Breen, A. Taieb, Ofer Dagan, Michael Schieber, Haim Gilboa, Jerry Thomas

Author Affiliations +

Proceedings Volume 5368, Medical Imaging 2004: Physics of Medical Imaging; (2004) https://doi.org/10.1117/12.535948
Event: Medical Imaging 2004, 2004, San Diego, California, United States

Abstract

Photoconductive polycrystalline mercuric iodide deposited on flat panel thin film transistor (TFT) arrays is being developed for direct digital X-ray detectors that can perform both radiographic and fluoroscopic medical imaging. The mercuric iodide is either vacuum deposited by Physical Vapor Deposition (PVD) or coated onto the array by a wet Particle-In-Binder (PIB) process. The PVD deposition technology has been scaled up to the 20 cm x 25 cm size required in common medical imaging applications. A TFT array with a pixel pitch of 127 microns is used for these imagers. Arrays of 10 cm x 10 cm size have been used to evaluate performance of mercuric iodide imagers. Radiographic and fluoroscopic images of diagnostic quality at up to 15 pulses per second were demonstrated. As we previously reported, the resolution is limited to the TFT array Nyquist frequency of ~3.9 lp/mm (127 micron pixel pitch). Detective Quantum Efficiency (DQE) has been measured as a function of spatial frequency for these imagers. The DQE is lower than the theoretically calculated value due to some additional noise sources of the electronics and the array. We will retest the DQE after eliminating these noise sources. Reliability and stress testing was also began for polycrystalline mercuric iodide PVD and PIB detectors. These are simplified detectors based upon a stripe electrode or circular electrode structure. The detectors were stressed under various voltage bias, temperature and time conditions. The effects of the stress tests on the detector dark current and sensitivity were determined.

Citation Download Citation

George Zentai, Larry Partain, Raisa Pavlyuchkova, Cesar Proano, Barry N. Breen, A. Taieb, Ofer Dagan, Michael Schieber, Haim Gilboa, and Jerry Thomas "Mercuric iodide medical imagers for low-exposure radiography and fluoroscopy", Proc. SPIE 5368, Medical Imaging 2004: Physics of Medical Imaging, (6 May 2004); https://doi.org/10.1117/12.535948

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available