Investigation of systematical overlay errors limiting litho process performance of thick implant resists

Alexandra G. Grandpierre; Roberto Schiwon; Jens -U. Bruch; Christoph Nacke; Uwe Paul Schroeder

doi:10.1117/12.532334

24 May 2004 Investigation of systematical overlay errors limiting litho process performance of thick implant resists

Alexandra G. Grandpierre, Roberto Schiwon, Jens -U. Bruch, Christoph Nacke, Uwe Paul Schroeder

Proceedings Volume 5375, Metrology, Inspection, and Process Control for Microlithography XVIII; (2004) https://doi.org/10.1117/12.532334
Event: Microlithography 2004, 2004, Santa Clara, California, United States

Abstract

Tapered resist profiles have been found to cause a deterimental effect on the overlay measurement capability, affecting lithography processes which utilize thick implant resist. Particularly, for resist thicknesses greater than 1.5 μm, the systematical contribution to the overlay error becomes predominant. In CMOS manufacturing, these resist types are being used mainly for high energy well implants. As design rules progressively shrink, the overlay requirements are getting tighter, such that the limits of the process capability are reached. Since the resist thickness cannot be reduced due to the requirements of the implant process, it becomes inevitable to reduce the systematical overlay error for the litho process involving thick resists. The following analysis concentrates on the tapers of overlay marks printed on thick i-line positive resists. Conventionally, overlay between two litho layers is measured from box in box marks with respect to a reference layer where the statistical shift between the boxes is expected to provide the biggest source of residuals. We observed however that an even bigger error could be introduced by an unevenness of the i-line resist tapers, adding asymmetrical chip magnification. The inclination of these tapers depends on the proximity and surface of the surrounding features and stack variations. We show that by adjusting soft and hard bake temperatures and times, tapers can be significantly reduced and thereby the overlay performance was greatly improved.

Citation Download Citation

Alexandra G. Grandpierre, Roberto Schiwon, Jens -U. Bruch, Christoph Nacke, and Uwe Paul Schroeder "Investigation of systematical overlay errors limiting litho process performance of thick implant resists", Proc. SPIE 5375, Metrology, Inspection, and Process Control for Microlithography XVIII, (24 May 2004); https://doi.org/10.1117/12.532334

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available