Paper
21 July 2004 Characterization of Lamb waves in absorbing plates
Author Affiliations +
Abstract
This research uses a combination of laser ultrasonics, signal processing and analytical modeling techniques to examine the propagation of transient Lamb waves in absorbing plates -- in particular an isotropic plate with a lossless fluid on one side. The motivation is to develop a non-contact, point source-receiver technique capable of measuring attenuation of Lamb waves in lossy situations in general. The theoretical model enables an understanding of loss mechanisms and enables prediction of attenuation. The laser ultrasonic techniques enable broadband, point source-receiver idealization. The proposed signal processing technique, the short-time Fourier transform, resolves a signal into the time-frequency domain and enables Lamb mode separation and calculation of energy distribution at specific frequency-velocity points on the dispersion curves. The experimental procedure uses a stress-free plate as a reference for system variation and other loss mechanisms. Then, a plate with fluid on one side is tested to validate the signal processing algorithm. There is satisfactory agreement between the attenuation measured and predicted in the frequency range of interest.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kritsakorn Luangvilai, Laurence J. Jacobs, Paul Wilcox, Michael J.S. Lowe, and Jianmin Qu "Characterization of Lamb waves in absorbing plates", Proc. SPIE 5394, Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems III, (21 July 2004); https://doi.org/10.1117/12.542478
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Signal attenuation

Wave plates

Signal processing

Ultrasonics

Wave propagation

Aluminum

Analytical research

Back to Top