Paper
10 September 2004 Displacement measurements of technical surfaces with a synchronously pumped external cavity diode laser
Jasper Mobius, Jurgen Czarske, Karsten Moldenhauer, Wolfgang Ertmer, Thomas Muller-Wirts
Author Affiliations +
Abstract
A novel principle for absolute position measurements of rough surfaces is presented. A measurement object with a rough surface acts as an external reflector for an antireflection coated laser diode. Determining the longitudinal mode spacing yields the distance from the laser diode to the measurement object. Synchronous pumping of the laser diode results in locking of the modes of the built-up Fabry-Perot resonator. Due to resonance enhancement the mode locked external cavity laser sensor allows highly resolved displacement measurements of rough surfaces. The influence of the object as well as the active gain medium on the accuracy of the measurements is investigated by experiments and simulations.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jasper Mobius, Jurgen Czarske, Karsten Moldenhauer, Wolfgang Ertmer, and Thomas Muller-Wirts "Displacement measurements of technical surfaces with a synchronously pumped external cavity diode laser", Proc. SPIE 5457, Optical Metrology in Production Engineering, (10 September 2004); https://doi.org/10.1117/12.543886
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Sensors

Resonators

Distance measurement

Modulation

Signal attenuation

Optical resonators

Back to Top