Solar viewing interferometer prototype

Richard G. Lyon; Jay R. Herman; Nader Abuhassan; Catherine Trout Marx; Semion Kizhner; Julie Crooke; Ronald W. Toland; Albert Mariano; Cheryl Salerno; Gary Brown; Tony Cazeau; Peter P. Petrone III; Billy Mamakos; Severine C. Tournois

doi:10.1117/12.552237

12 October 2004 Solar viewing interferometer prototype

Richard G. Lyon, Jay R. Herman, Nader Abuhassan, Catherine Trout Marx, Semion Kizhner, Julie Crooke, Ronald W. Toland, Albert Mariano, Cheryl Salerno, Gary Brown, Tony Cazeau, Peter P. Petrone III, Billy Mamakos, Severine C. Tournois

Author Affiliations +

Proceedings Volume 5487, Optical, Infrared, and Millimeter Space Telescopes; (2004) https://doi.org/10.1117/12.552237
Event: SPIE Astronomical Telescopes + Instrumentation, 2004, Glasgow, United Kingdom

Abstract

The Earth Atmospheric Solar-Occultation Imager (EASI) is a proposed interferometer with 5 telescopes on an 8-meter boom in a 1D Fizeau configuration. Placed at the Earth-Sun L2 Lagrange point, EASI would perform absorption spectroscopy of the Earth’s atmosphere occulting the Sun. Fizeau interferometers give spatial resolution comparable to a filled aperture but lower collecting area. Even with the small collecting area the high solar flux requires most of the energy to be reflected back to space. EASI will require closed loop control of the optics to compensate for spacecraft and instrument motions, thermal and structural transients and pointing jitter. The Solar Viewing Interferometry Prototype (SVIP) is a prototype ground instrument to study the needed wavefront control methods. SVIP consists of three 10 cm aperture telescopes, in a linear configuration, on a 1.2-meter boom that will estimate atmospheric abundances of O₂, H₂O, CO₂, and CH₄ versus altitude and azimuth in the 1.25 - 1.73 micron band. SVIP measures the Greenhouse Gas absorption while looking at the sun, and uses solar granulation to deduce piston, tip and tilt misalignments from atmospheric turbulence and the instrument structure. Tip/tilt sensors determine relative/absolute telescope pointing and operate from 0.43 - 0.48 microns to maximize contrast. Two piston sensors, using a robust variation of dispersed fringes, determine piston shifts between the baselines and operate from 0.5 - 0.73 microns. All sensors are sampled at 800 Hz and processed with a DSP computer and fed back at 200 Hz (3 dB) to the active optics. A 4 Hz error signal is also fed back to the tracking platform. Optical performance will be maintained to better than λ/8 rms in closed-loop.

Citation Download Citation

Richard G. Lyon, Jay R. Herman, Nader Abuhassan, Catherine Trout Marx, Semion Kizhner, Julie Crooke, Ronald W. Toland, Albert Mariano, Cheryl Salerno, Gary Brown, Tony Cazeau, Peter P. Petrone III, Billy Mamakos, and Severine C. Tournois "Solar viewing interferometer prototype", Proc. SPIE 5487, Optical, Infrared, and Millimeter Space Telescopes, (12 October 2004); https://doi.org/10.1117/12.552237

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
8 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Space telescopes

Telescopes

Mirrors

Digital signal processing

Beam splitters

Interferometers

Show All Keywords

Keywords/Phrases

Search In:

Publication Years