Paper
3 January 2005 Design and fabrication of an integrated optical flying head for near-field recording system
Yanyang Zi, Zhengjia He, Dapeng Zhao, Qingxiang Li
Author Affiliations +
Abstract
To achieve 50nm flying height and accuracy tracking motion, it is essential to reduce the whole size of optical flying head (OFH) to improve mechanical and optical performance. With a view to the practical applicability, a novel integrated OFH based on the combination of SIL and objective lens (OL) is proposed, which possesses both high optical performance and reasonable tolerance in assembly. In addition, the fabrication process of this OFH is illustrated in detail. Finally, the main parameters of ABS for OFH slider are presented by means of numerical simulation. The simulation result demonstrates that the flying height of the integrated OFH slider can keep stable from 43nm to 44nm at different radium of optical disk, which can yield high signal/noise ratio optical signal during the read/write motion in near field recording (NFR) system.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yanyang Zi, Zhengjia He, Dapeng Zhao, and Qingxiang Li "Design and fabrication of an integrated optical flying head for near-field recording system", Proc. SPIE 5643, Advances in Optical Data Storage Technology, (3 January 2005); https://doi.org/10.1117/12.574720
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Near field optics

Head

Integrated optics

Near field

Objectives

Optical discs

Optical storage

RELATED CONTENT

Rewritable optical disk technologies
Proceedings of SPIE (November 17 2000)
Multilevel volumetric optical storage
Proceedings of SPIE (October 12 1994)
Solid immersion lens
Proceedings of SPIE (May 07 1999)

Back to Top