The optomechanical design and operation of the ionospheric mapping and geocoronal experiment

Phillip C. Kalmanson; Janusz Wilczynski; Kent Wood; Kenneth Dymond; Stefan Thonnard; James Spann

doi:10.1117/12.617861

18 August 2005 The optomechanical design and operation of the ionospheric mapping and geocoronal experiment

Phillip C. Kalmanson, Janusz Wilczynski, Kent Wood, Kenneth Dymond, Stefan Thonnard, James Spann

Proceedings Volume 5901, Solar Physics and Space Weather Instrumentation; 59010Q (2005) https://doi.org/10.1117/12.617861
Event: Optics and Photonics 2005, 2005, San Diego, California, United States

Abstract

The Ionospheric Mapping and Geocoronal Experiment (IMAGER) is a space-based, multispectral, imaging payload, designed at the U.S. Naval Research Laboratory. The IMAGER's primary science mission is to find, track, and measure ionospheric irregularities as they move across the surface of the Earth and vary with time. IMAGER will observe the ionosphere of the Earth in narrow extreme- and far-ultraviolet passbands centered at 83.4, 130.4, 135.6, and 143.0 nm. These emissions are produced by naturally occurring airglow emission from the nighttime and daytime ionosphere and thermosphere. The IMAGER consists of an imaging telescope with a filter wheel assembly and a pair of microchannel plate-based imaging detectors with cross delay line readouts. The telescope of the instrument consists of a 160 mm diameter, F/4.0 off-axis very fast aplanatic Gregorian telescope. The focal length is 640 mm and the field of view is 1.6° × 1.6° which will cover approximately 1000 × 1000 km² on the Earth's surface. The modulation transfer function is above 0.90 at 2.8 line pairs-millimeter^-1 over the field, which corresponds to a line pair separated by 20 km on the Earth. The spatial resolution is approximately 10 × 10 km² and is oversampled by a factor of 9 (3 × 3 pixels per resolution element). A system of reflective filters is used to select different wavelengths of interest. The telescope will be gimbaled to provide a field-of-regard encompassing the entire disk and limb of the Earth. The gimbal will also allow the telescope to track the ionospheric irregularities as they move. This paper describes the design of the optical and mechanical systems and their intended performance and includes an overview of the mission and science requirements that defined the aforementioned systems.

Citation Download Citation

Phillip C. Kalmanson, Janusz Wilczynski, Kent Wood, Kenneth Dymond, Stefan Thonnard, and James Spann "The optomechanical design and operation of the ionospheric mapping and geocoronal experiment", Proc. SPIE 5901, Solar Physics and Space Weather Instrumentation, 59010Q (18 August 2005); https://doi.org/10.1117/12.617861

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available