Paper
10 November 2005 An integrated optical disk resonator for sensing applications
Aaron Schweinsberg, Sandrine Hocdé, Nick N. Lepeshkin, Robert W. Boyd, Christopher Chase, Julie E. Fajardo
Author Affiliations +
Abstract
We describe the design and fabrication of an integrated optical disk resonator and demonstrate its ability to perform as an environmental sensor. The device consists of a 500 micron radius disk side-coupled to a straight bus waveguide, fabricated in silicon oxy-nitride (SiON). The guiding layer has a refractive index of 1.8 and is 350 nm thick. Since the devices require few processing steps and can be fabricated using the well-established techniques of plasma enhanced chemical vapor deposition and optical lithography, they are reasonably easy to produce. By monitoring the transmission of 1550 nm light through the resonators, we can measure changes in the refractive index at the surface. We determine a sensitivity of 1.0 x 10-5 to changes in the surface index with experiments using sucrose solutions of varying concentrations.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Aaron Schweinsberg, Sandrine Hocdé, Nick N. Lepeshkin, Robert W. Boyd, Christopher Chase, and Julie E. Fajardo "An integrated optical disk resonator for sensing applications", Proc. SPIE 6005, Photonic Crystals and Photonic Crystal Fibers for Sensing Applications, 60050L (10 November 2005); https://doi.org/10.1117/12.630685
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resonators

Waveguides

Integrated optics

Refractive index

Sensors

Environmental sensing

Scattering

Back to Top