Paper
1 February 2006 Design and fabrication of fluorescence fiber gratings
Weimin Sun, Yanrong Xiang, Yang Zhang, Lei Zhao, Yang Yang, Miao Ye, Libo Yuan
Author Affiliations +
Proceedings Volume 6034, ICO20: Optical Design and Fabrication; 60341V (2006) https://doi.org/10.1117/12.668169
Event: ICO20:Optical Devices and Instruments, 2005, Changchun, China
Abstract
Rare-earth-element-doped fibers are wildly used in fiber amplifiers, fiber lasers and fiber sensors. Fiber Bragg Gratings (FBGs) are very important optical components in optical communication and sensing. The fluorescence fiber grating consists of fiber amplifiers and fiber gratings. Some fabrication methods of the fluorescence fiber grating are proposed in this paper. After pretreated, for example, Hydrogen loading, the rare-earth-elements-doped fibers become photosensitive fiber. The FBGs can be fabricated along the rare-earth-elements-doped fiber to form the fluorescence fiber gratings. When the pump light goes through the fluorescence fiber grating, the fluorescence light emits as incoherent signal. The power spectrum can be simulated based on an effective analysis method. In experiment, the fluorescence fiber gratings is fabricated to the Erbium doped fiber after Hydrogen loading. The power spectrum of these samples are obtained.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weimin Sun, Yanrong Xiang, Yang Zhang, Lei Zhao, Yang Yang, Miao Ye, and Libo Yuan "Design and fabrication of fluorescence fiber gratings", Proc. SPIE 6034, ICO20: Optical Design and Fabrication, 60341V (1 February 2006); https://doi.org/10.1117/12.668169
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Luminescence

Fiber Bragg gratings

Structured optical fibers

Absorption

Fiber lasers

Fiber amplifiers

Fiber optics sensors

Back to Top