Paper
1 March 2006 A study of angular dependence in the ablation rate of polymers by nanosecond pulses
James E. A. Pedder, Andrew S. Holmes
Author Affiliations +
Abstract
Measurements of ablation rate have traditionally been carried out only at normal incidence. However, in real-world applications ablation is often carried out at oblique angles, and it is useful to have prior knowledge of the ablation rate in this case. Detailed information about the angular dependence is also important for the development of ablation simulation tools, and can provide additional insight into the ablation mechanism. Previously we have reported on the angular dependence of direct-write ablation at 266 nm wavelength in solgel and polymer materials. In this paper we present a systematic study of angular dependence for excimer laser ablation of two polymer materials of interest for microfabrication: polycarbonate and SU8 photoresist. The results are used to improve simulation models to aid in mask design.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James E. A. Pedder and Andrew S. Holmes "A study of angular dependence in the ablation rate of polymers by nanosecond pulses", Proc. SPIE 6106, Photon Processing in Microelectronics and Photonics V, 61061B (1 March 2006); https://doi.org/10.1117/12.659793
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Data modeling

Polymers

Excimer lasers

Etching

Solids

Photoresist materials

RELATED CONTENT

Laser-LIGA for Serpentine Ni Microstructure
Proceedings of SPIE (November 21 2001)
Laser fabrication and assembly processes for MEMS
Proceedings of SPIE (June 29 2001)
Fabrication of planar blazed grating using laser LIGA
Proceedings of SPIE (September 03 2002)
Excimer laser polymer ablation: the first twenty years
Proceedings of SPIE (September 13 2002)
Excimer laser micromachining of structures using SU-8
Proceedings of SPIE (August 30 1999)

Back to Top