Paper
16 May 2006 Resistor array infrared projector temperature resolution: revisited
Owen M. Williams, Leszek Swierkowski, Breck A. Sieglinger, George C. Goldsmith II
Author Affiliations +
Abstract
Resistor array infrared projectors offer the unique potential of simultaneously covering both a wide apparent temperature range and providing fine temperature resolution at low output levels. The temperature resolution capability may not be realized, however, if the projector error sources are not controlled; for example, residual nonuniformity after nonuniformity correction (NUC) procedures have been applied, temporal noise in analog drive voltages and quantization at several points in the projection system, all of which may introduce errors larger than the desired resolution. In this paper the temperature resolution limits are assessed in general. In particular, the quantization errors are assessed and the post-NUC residual nonuniformity levels required for achievement of fine temperature resolution are calculated.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Owen M. Williams, Leszek Swierkowski, Breck A. Sieglinger, and George C. Goldsmith II "Resistor array infrared projector temperature resolution: revisited", Proc. SPIE 6208, Technologies for Synthetic Environments: Hardware-in-the-Loop Testing XI, 62080V (16 May 2006); https://doi.org/10.1117/12.663181
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Projection systems

Mid-IR

Resistors

Long wavelength infrared

Nonuniformity corrections

Quantization

Infrared radiation

Back to Top