A method to estimate the point response function of digital x-ray detectors from edge measurements

Iacovos S. Kyprianou; Aldo Badano; Brandon D. Gallas; Kyle J. Myers

doi:10.1117/12.709517

13 March 2007 A method to estimate the point response function of digital x-ray detectors from edge measurements

Iacovos S. Kyprianou, Aldo Badano, Brandon D. Gallas, Kyle J. Myers

Proceedings Volume 6510, Medical Imaging 2007: Physics of Medical Imaging; 65100B (2007) https://doi.org/10.1117/12.709517
Event: Medical Imaging, 2007, San Diego, CA, United States

Abstract

Currently, the most accurate measurement of the detector point response can be performed with the pinhole method. The small size of the pinhole however, severely reduces the x-ray intensity output, requiring long exposures, something that can potentially reduce the x-ray tube life-cycle. Even though deriving the 1D Line Response Function (LRF)of the detector using the edge method is much more effcient, the measurement process introduces a convolution with a line, in addition to the common pixel sampling, effectively broadening the LRF. We propose a practical method to recover the detector point response function by removing the effects of the line and the pixel from a set of Edge Response Function (ERF) measurements. We use the imaging equation to study the effects of the edge,line and pixel measurements, and derive an analytical formula for the recovered detector point response function based on a gaussian mixture model. The method allows for limited recovery of asymmetries in the detector response function. We verify the method with pinhole and edge measurements of a digital flat panel detector. Monte Carlo simulations are also performed, using the MANTIS x-ray and optical photon and electron transport simulation package, for comparison. We show that the standard LRF underestimates the detector when compared with the recovered response. Our simulation results suggest that both hole methods for estimating the detector response have limitations in that they cannot completely capture rotational asymmetries or other morphological details smaller than the detector pixel size.

Citation Download Citation

Iacovos S. Kyprianou, Aldo Badano, Brandon D. Gallas, and Kyle J. Myers "A method to estimate the point response function of digital x-ray detectors from edge measurements", Proc. SPIE 6510, Medical Imaging 2007: Physics of Medical Imaging, 65100B (13 March 2007); https://doi.org/10.1117/12.709517

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available