Aera193i: aerial imaging mask inspection for immersion lithography

Yoel Zabar; Chaim Braude; Shmoolik Mangan; Dan Rost; Raunak Mann

doi:10.1117/12.713947

5 April 2007 Aera193i: aerial imaging mask inspection for immersion lithography

Yoel Zabar, Chaim Braude, Shmoolik Mangan, Dan Rost, Raunak Mann

Proceedings Volume 6518, Metrology, Inspection, and Process Control for Microlithography XXI; 65183G (2007) https://doi.org/10.1117/12.713947
Event: SPIE Advanced Lithography, 2007, San Jose, California, United States

Abstract

Advanced lithography became possible using breakthrough technologies, including phase shift masks, advanced illumination modes, aggressive OPC patterns and 193nm immersion optics. The Applied Materials Aera193 system, an at-wavelength aerial reticle inspection tool, was introduced for the 90-65nm technology nodes. In the era of immersion lithography and 55-45nm nodes, there is an increasing demand for Aerial inspection under immersion conditions. To face this demand, the Aera193i was upgraded with expanded illumination and collection optics to support up to 1.4 NA immersion conditions. Here, we describe novel Aerial inspection results under immersion conditions. We studied the detection of a variety of defect types on 55nm node phase shift masks for immersion lithography. We found that the immersion-emulation inspection was able to demonstrate a good detection line, with extremely low false alarms and nuisance call rate. We also studied the relationship between Aerial defect detection and actual defect printability by printing the same mask on wafer. We found good correlation between Aera193i detection line and actual defect printability. We also address the polarization effects under immersion NA. We demonstrate that under polarized stepper illumination the polarization effects on the image are negligible, while aerial imaging reliably emulates mask pattern polarization effects.

Citation Download Citation

Yoel Zabar, Chaim Braude, Shmoolik Mangan, Dan Rost, and Raunak Mann "Aera193i: aerial imaging mask inspection for immersion lithography", Proc. SPIE 6518, Metrology, Inspection, and Process Control for Microlithography XXI, 65183G (5 April 2007); https://doi.org/10.1117/12.713947

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available