Paper
7 January 2008 Selection of parameters in laser-amplifier injection locking
Jianmei Liu, Yunfei Xu, Zhang Zhang, Shunli Han, Xiaolong Wang, Qiang Lin
Author Affiliations +
Abstract
Narrow-linewidth tunable diode lasers have been widely used in the field of research, but the output power of such lasers is generally low. This paper deals with a low-cost and easily constructed diode laser amplifier. With the technique of laser injection, the output of an external cavity diode laser (ECDL), which is locked onto the D2 line of 87Rb, is injected into a common commercial 784nm laser diode and the injection locking is achieved. This yields a 120mW single mode laser of which the line width is less than 1MHz, which is to be used in laser trapping of 87Rb atom. Furthermore, the influences of the parameters, including the seed light power, the injection current and the temperature, on the operating characteristics of the injection locked laser diode is investigated. The threshold over which the locking would be interrupted due to the variation of the current and the temperature is also derived, which leads to the optimized operating parameters of injection locking.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jianmei Liu, Yunfei Xu, Zhang Zhang, Shunli Han, Xiaolong Wang, and Qiang Lin "Selection of parameters in laser-amplifier injection locking", Proc. SPIE 6824, Semiconductor Lasers and Applications III, 68240Q (7 January 2008); https://doi.org/10.1117/12.757771
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Semiconductor lasers

Absorption

Stereolithography

Rubidium

Polarization

Chemical species

Laser applications

Back to Top