Paper
4 January 2008 Properties of aluminum doped zinc oxide thin film by sol-gel process
Author Affiliations +
Abstract
The thin films of transparent conductive aluminum doped ZnO have been deposited by the sol-gel process. In this study, important deposition parameters were thoroughly investigated in order to find appropriate procedures to grow large area thin films of low resistivity and high transparency at low cost for device applications. Experimental results indicated that the annealing temperature affected the crystal structure of the aluminum doped ZnO films considerably, but the controlling of effective doping concentration was the key point to achieve low film resistance by sol-gel process. It was adjusted by controlling the precursor concentration. Although the structure of our aluminum doped ZnO films did not have the preferred orientation along (002) plane, they had a high transmittance of over 87 % in visible region. In our experiments, the most suitable Al doped concentration was 1~4 mol%. The annealing temperature for the pre-heat treatment was 250 °C and post-heat treatment was 400-600 °C. The Al doped and undoped ZnO films are very uniform and compact. It is confirmed that the doping concentration and thermal treatment are important factor with electrical conductivity of ZnO films.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sung-Hak Yi, Seung-Kyu Choi, Jae-Min Jang, Jung-A Kim, and Woo-Gwang Jung "Properties of aluminum doped zinc oxide thin film by sol-gel process", Proc. SPIE 6831, Nanophotonics, Nanostructure, and Nanometrology II, 68311A (4 January 2008); https://doi.org/10.1117/12.757447
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Zinc oxide

Aluminum

Doping

Sol-gels

Thin films

Annealing

Crystals

Back to Top