Paper
11 April 2008 Negative and iterated spacer lithography processes for low variability and ultra-dense integration
Andrew Carlson, Tsu-Jae King Liu
Author Affiliations +
Abstract
Variation in the critical dimension (CD) of a transistor is a primary concern for advanced lithography. Because variation from sources such as corner rounding or line edge roughness does not scale with CD, variability in transistor performance increases with scaling and may impact the timing or even the functionality of critical circuits such as static random access memories (SRAM) and ring oscillators. Spacer lithography is an attractive patterning method for future technology nodes, because its use of a very uniform and controllable chemical vapor deposition (CVD) step allows for the definition of very narrow lines with low variation and reduced pitch1,2. In practice, however, the possible pitch reductions are limited by the need for conventional lithography to produce negative features (e.g., trenches and holes) and increasing CD variability with iterated spacer processing. In this work, an extension to spacer lithography is presented to overcome these limitations. Negative features down to 30nm in width are fabricated using spacer-defined features. A multi-tiered hard mask process is also presented to enable eight-fold pitch reduction with no increase in CD variation. In combination, these processes enable ultra-dense circuit integration for regular layouts.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew Carlson and Tsu-Jae King Liu "Negative and iterated spacer lithography processes for low variability and ultra-dense integration", Proc. SPIE 6924, Optical Microlithography XXI, 69240B (11 April 2008); https://doi.org/10.1117/12.772049
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Lithography

Photomasks

Etching

Critical dimension metrology

Optical lithography

Amorphous silicon

Chemical vapor deposition

RELATED CONTENT


Back to Top