Paper
17 November 2008 Optomechatronic integration for the optimal control system of multi-fiber active alignment
T. Y. Lin, M. T. Yu, C. S. Lee
Author Affiliations +
Proceedings Volume 7266, Optomechatronic Technologies 2008; 72661T (2008) https://doi.org/10.1117/12.816258
Event: International Symposium on Optomechatronic Technologies, 2008, San Diego, California, United States
Abstract
The performance of the alignment governs the quality of the optical communications. The active alignment methods search the position with highest optical power and connect fiber on this position. Thus, active method can adjust the connection for different properties on the fiber end-face. In the literatures, the methods for the multi-fiber alignment can increase the optical power summation of all fibers, but the results are not very accurate. This study used the numerical optimization methods, the gradient based and non-gradient based methods, for the optical component alignment, and discusses the performance on different optimization methods applied on multi-fiber alignment. There are two indexes used to judge the performances of different methods: the required time and the optical power. It is obvious that the gradient based methods can have the results with better optical power, and the non-gradient based methods are very fast to converge, but the optical powers are still very small comparing to the gradient based methods.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. Y. Lin, M. T. Yu, and C. S. Lee "Optomechatronic integration for the optimal control system of multi-fiber active alignment", Proc. SPIE 7266, Optomechatronic Technologies 2008, 72661T (17 November 2008); https://doi.org/10.1117/12.816258
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical alignment

Optimization (mathematics)

Optical components

Opto mechatronics

Active optics

Control systems

Optical communications

RELATED CONTENT

Fiber Optic Splices
Proceedings of SPIE (February 12 1985)
Micro integration of VCSELs, detectors, and optics
Proceedings of SPIE (April 30 1999)
Applications Of Optical Sensors In The Automobile Industry
Proceedings of SPIE (October 29 1989)
Optical Systems Engineering: A Tutorial
Proceedings of SPIE (October 04 1979)

Back to Top