Paper
31 August 2009 Optical bench elements (petals) for IXO
Author Affiliations +
Abstract
X-rays at various energies can be focussed with reflective optics at grazing incidence with a well-known reflectivity achieving a high effective area by means of various designs. On XMM the high collecting area was achieved by means of thin mirror shells which were made by nickel replication combining the parabola and hyperbola sections according to the WOLTER I design in a single element. 58 of these "elements" were combined to build a mirror assembly with an effective area of 1450 cm2 @1.5 keV per mirror assembly. In order to achieve a higher effective area for IXO the density needs to be reduced. This could be achieved by pore optics elements integrated into a set of 8 petals made of Cesic® as an optical bench. This design is fitting into the fairing of Ariane with a diameter of 4.2 m and achieves an effective area of 3.36 m2. It will withstand the high launch loads of up to 60 g and provide a negligible degradation to the optical performance due to thermal loads and gravitational relaxation. The design, including the interfaces to the telescope and to the pore optics, will be presented.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dirk Kampf, Markus Erhard, Marcos Bavdaz, Kotska Wallace, Philippe Gondoin, and Maximilien J. Collon "Optical bench elements (petals) for IXO", Proc. SPIE 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV, 74371B (31 August 2009); https://doi.org/10.1117/12.826042
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Silicon

Telescopes

Space telescopes

Optical components

Optical benches

X-ray optics

RELATED CONTENT

ESA-led ATHENA/IXO optics development status
Proceedings of SPIE (October 06 2011)
Development and testing of the eROSITA mirror modules
Proceedings of SPIE (September 30 2011)
The status of the XEUS x-ray observatory mission
Proceedings of SPIE (August 18 2005)
Assembling silicon pore optics into a modular structure
Proceedings of SPIE (June 13 2006)
IXO system studies and technology preparation
Proceedings of SPIE (August 31 2009)

Back to Top