Paper
3 December 2009 Method of analysis to measure the tangential curvature in a test sphere
Paloma G. Mendoza-Villegas, Gerardo Trujillo-Schiaffino, Didia P. Salas-Peimbert, Alicia Bustillos-Trujillo
Author Affiliations +
Proceedings Volume 7499, Seventh Symposium Optics in Industry; 74990K (2009) https://doi.org/10.1117/12.848966
Event: Seventh Symposium on Optics in Industry, 2009, Guadalajara, Jalisco, Mexico
Abstract
Several techniques have been used to determine the radius of curvature of the cornea. In this article, we describe the use of a method obtained trough ray analysis, based in geometrical analysis and lateral magnification equation. A pattern of an increasing point was displayed in a flat screen monitor; images of this point were captured for a test sphere with a CCD camera. The obtained data was then processed for the calculation of the sphere curvature. The experimental setup is presented.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Paloma G. Mendoza-Villegas, Gerardo Trujillo-Schiaffino, Didia P. Salas-Peimbert, and Alicia Bustillos-Trujillo "Method of analysis to measure the tangential curvature in a test sphere", Proc. SPIE 7499, Seventh Symposium Optics in Industry, 74990K (3 December 2009); https://doi.org/10.1117/12.848966
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical spheres

Cornea

CCD cameras

Image acquisition

Eye

Image processing

Cameras

Back to Top