Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters

Hironobu Makitsubo; Takehiko Wada; Makoto Mita

doi:10.1117/12.857781

22 July 2010 Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters

Hironobu Makitsubo, Takehiko Wada, Makoto Mita

Author Affiliations +

Proceedings Volume 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation; 773920 (2010) https://doi.org/10.1117/12.857781
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

We are developing high performance mid-infrared (especially 30-40μm wavelength regions) multilayer interference filters with mechanical strength and robustness for thermal cycling toward cryogenic infrared astronomical missions. Multilayer interference filters enable us to design a wide variety of spectral response by controlling refractive index and thickness of each layer. However, in mid- and far-infrared (MIR/FIR) regions, there are a few optical materials so that we can only use limited refractive index values to design filters, which makes difficult to realize high performance filters. It is also difficult to deposit thick layers required for MIR/FIR multilayer filters. Furthermore, deposition of two materials, which have different coefficients of thermal expansion, makes filters fragile for thermal cycling. To clear these problems, we introduce sub-wavelength structures (SWS) for controlling the refractive index. Then, only one material is necessary for fabricating filters, which enables us to fabricate filters with mechanical strength and robustness for thermal cycling. According to the effective medium approximation (EMA) theory, the refractive index of randomly mixing materials in sub-wavelength scale is controllable by changing the ratio of mixing materials. However, it is not clear that EMA can be applied to such simple SWS, periodic cylindrical holes on a bulk material, which is easily fabricated by photolithography. In order to verify the controllability of refractive index by simple SWS, we have fabricated simple SWS on a silicon substrate and measured its transmittance. Comparing measured transmittance with theoretical transmittance calculated by EMA, we confirm that EMA can be applied to simple SWS fabricated by photolithography.

Citation Download Citation

Hironobu Makitsubo, Takehiko Wada, and Makoto Mita "Verification of the controllability of refractive index by subwavelength structure fabricated by photolithography: toward single-material mid- and far-infrared multilayer filters", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 773920 (22 July 2010); https://doi.org/10.1117/12.857781

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available